Technical Specification
Tar & Glue Remover. Technical Snapshot.
Solvent-Based Tar & Adhesive Remover
Spray-On, Rinse-Off
Paintwork, Wheels, Plastics, Protective Coatings
1–2 Minutes
Tar, Adhesive & Bitumen Removal Spray
A powerful solvent-based cleaner designed to dissolve stubborn tar, adhesive residues, and road bitumen from vehicle surfaces. The slow-evaporating formula provides a long working time, giving the product time to penetrate and dissolve stubborn contamination effectively.
Get notified when available
Why Use Tar & Glue Remover?
Engineered For Chemical Decontamination.
Dissolves Tar & Bitumen
Breaks down tar spots, asphalt contamination, and adhesive residues from road markings or stickers, allowing them to be safely wiped or rinsed away without aggressive scrubbing.
Long Working Time
The slow-evaporating formula provides a long working time, giving the product time to penetrate and dissolve stubborn contamination effectively.
Safe for Paint, Wheels & Plastics
Despite its strong cleaning performance, the formula remains safe for use on paintwork, wheels, plastics, and protective coatings, making it suitable for both professional detailing and enthusiast use.
Essential Pre-Coating Step
This product is an essential step in the chemical decontamination process before polishing or ceramic coating application.
Application Guide
How To Use Tar & Glue Remover.
Apply
Spray the product onto the contaminated surface starting from the lower panels.
Dwell
Allow the product to dwell for 1–2 minutes to dissolve contamination.
Rinse
Rinse thoroughly with a pressure washer.
Wash
Wash the vehicle using a car shampoo afterwards.
Repeat
Repeat if necessary on stubborn contamination.
Dilution Reference
Professional Tips
- Always wear protective gloves when using solvent-based cleaners.
- Apply to a cool, dry surface out of direct sunlight.
- Test the product on a small inconspicuous area before use.
- Do not allow the product to dry on the surface.
Professional Workflow
Build Your Wash System.
Every ULTRACOAT™ product fits into a complete detailing system. Follow each stage for the safest, most effective result.
Master Wash
Break down road film and heavy contamination before contact.
Shampoo+
Premium pH-neutral shampoo for a safe, spot-free contact wash.
Iron Hunter
Chemical decontamination to remove bonded iron fallout and tar.
Wet Coat
Ceramic maintenance spray applied to a wet surface for lasting protection.
Tar & Glue Remover FAQ
Common Questions.
How long should I leave the product on before rinsing?
Allow the product to dwell for 1–2 minutes to dissolve contamination, then rinse thoroughly with a pressure washer.
Is it safe for ceramic coatings?
Yes. The formula remains safe for use on paintwork, wheels, plastics, and protective coatings.
When should I use this product?
This product is an essential step in the chemical decontamination process before polishing or ceramic coating application.
Should I wash the car afterwards?
Yes. Wash the vehicle using a car shampoo after rinsing.
Can it be applied in direct sunlight?
No. Apply to a cool, dry surface out of direct sunlight, and do not allow the product to dry on the surface.
Complete The System
